B2 · London, ON
Care and treatment in London: what the code requires
What binds a care facilities (b2) building in London?
A care and treatment building in London must be sprinklered throughout with no size exemption — that is the binding requirement, under the 2024 Ontario Building Code (O. Reg. 163/24).
Systems required
7
typical 2-storey, 20k sf profile
Full-retrofit capex
$202,716–$710,100
if nothing is in place
Occupant load basis
B2
class
Code in force
ON
2024 Ontario Building Code (O. Reg. 163/24)
Run your building, not the typical one
Pre-filled for a care facilities (b2) building in London. Change the storeys, area and systems in place to get your own gap list and memo.
Set the occupancy, size and systems on the left. The generator returns the required systems with code citations, the gap list with capex bands, and a printable scope memo.
What inspectors fail care facilities (b2) buildings on
- Fire door hold-open devices not releasing on alarm
- Smoke compartment barriers breached above ceilings
- Fire drill records incomplete at inspection
- Defend-in-place procedures not aligned with the fire safety plan
Hospitals, long-term care and treatment occupancies where occupants may be incapable of self-preservation. Sprinklering is mandatory with no size exemption, and defend-in-place design replaces full evacuation. In London, these buildings are read against the 2024 Ontario Building Code (O. Reg. 163/24), in force since 2025-01-01, with maintenance enforced under the Ontario Fire Code (O. Reg. 213/07, as amended).
The occupant load is the number everything else hangs on. NBC 2020 Div. B Table 3.1.17.1 — care loads are set by sleeping and treatment rooms, not by floor area. Once the load is known, the code sets the exit count, the egress width, and whether the alarm and sprinkler triggers fire. An owner who guesses the load guesses the whole scope.
What inspectors actually fail care facilities (b2) buildings on in Ontario is consistent: fire door hold-open devices not releasing on alarm; smoke compartment barriers breached above ceilings; fire drill records incomplete at inspection. The pattern matters because most of it is maintenance discipline, not capital — but the items that are capital, like suppression matched to the wrong hazard, are the expensive surprises.
Budgeting should use region-adjusted bands. Securlor models Ontario at 108% of the national baseline; a sprinkler retrofit that prices at $8 per square foot nationally models near $8 here. Sequence the scope: life-safety gaps that block occupancy or insurance first, monitoring contracts second, elective hardening last.
This page is a planning scope. The authority having jurisdiction in London — not this site — decides what binds a specific building, and a qualified professional must confirm the requirement set against the adopted edition.
Planning scope — This is a planning scope, not a code compliance opinion. Code interpretation is jurisdictional and enforced by the authority having jurisdiction — a municipal official, not this site. Confirm every requirement against the adopted code edition with a qualified professional before you design, budget or build.
How these figures were produced
- Observed — Recorded directly from the cited source series, unadjusted.
- Modelled — Derived arithmetically from observed inputs using the published method; not a market quote.
Sources
- [1] 2024 Ontario Building Code (O. Reg. 163/24) — requirement framework for Ontario
- [2] Ontario Fire Code (O. Reg. 213/07, as amended) — maintenance and inspection duties
- [3] Securlor modelled cost series — national baseline, region-adjusted
What life-safety systems does a Care facilities (B2) building need in London?
Run the scope generator above with your storeys, floor area and existing systems — it returns the required list with the code clause for each. The requirement set depends on occupant load and building height, not just the occupancy class.
How is occupant load calculated for a Care facilities (B2) building?
NBC 2020 Div. B Table 3.1.17.1 — care loads are set by sleeping and treatment rooms, not by floor area.
Which code edition applies in London?
The 2024 Ontario Building Code (O. Reg. 163/24), with maintenance under the Ontario Fire Code (O. Reg. 213/07, as amended). In force since 2025-01-01.
Is this a code compliance opinion?
No. It is a planning scope assembled from the published model code. The authority having jurisdiction governs, and a code consultant or fire protection engineer must confirm the scope before you act on it.
The scope above wrote its compliance capex into your deal file. Carry it to a sister site to price the rest of the transaction, or read the London market page for the full code picture.
Not advice — Securlor is a data publisher. Nothing here is professional, financial, legal, or investment advice, and nothing here is an offer or a quote. Figures are indicative benchmarks for comparison and must be confirmed with a qualified professional before you rely on them. About Securlor